Tesla Model 3 Frunk Button cover/recess - image

Files (1)

model_3_frunk_button3.stl

STL

77.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
model_3_frunk_button3.stl	Primary model	77.4 KB STL	Slice file	Slice file	Slice file	Ensure a clean and dry print bed for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Tesla Model 3 Frunk Button cover/recess

0 downloads27 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Simple cover to create a deeper recessed hole for the Tesla Model 3's frunk release button. This should help prevent it from being triggered inadvertently by stuff shifting around in the frunk. The shroud surrounding the frunk latch pops off very easily, allowing access to disconnect the switch, remove it, put the recess piece on, and replace.

Compatible Cars

Tesla Model 3

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Aron Aron (rkr007) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.