Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 90% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| TM3_-_Jack_Pad_Knob_For__Puck.stl | Primary model | 186.1 KB STL | Slice file | Slice file | Slice file | Scale by 1% if using materials other than ABS due to shrinkage |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model 3 - Jack Pad Knob for Puck
Shared by
3DPrintedCarPartDescription
This thing will turn a hockey puck into a Tesla Model 3 Jack Pad. It attaches to the centre of the puck with a small screw and is designed to friction fit in the Model 3 jack point holes. It holds the puck firmly in place while you align your jack. I printed mine in ABS with 100% infill, it fits perfectly for me. ABS tends to shrink a bit so if you use other materials you may need to scale it by 1% or so. Please post in the comments if you have success with other materials and how much you had to scale it. @alaurendeau has created a excellent storage container for these jack pads: https://www.thingiverse.com/thing:3594790
Compatible Cars
Originally published on thingiverse.com by Leon Loo (lloo) · License: CC0
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
