Tesla Model 3 Power Liftgate Button Mount - image

Files (1)

PLGButtonMount.stl

STL

207.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
PLGButtonMount.stl	Mount / bracket	207.2 KB STL	Slice file	Slice file	Slice file	Ensure a clean and level print bed for proper adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Tesla Model 3 Power Liftgate Button Mount

0 downloads27 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I cringed at the thought of drilling a hole in my Tesla to mount the optional front power liftgate button included with the teslaoffer product (https://www.teslaoffer.com/product/model-3-power-liftgate-soft-closing). Designed this mount to clip into an exiting trim clip under the dash. No tools or hardware required. Just pop out the plastic clip and put back in with this part added. Switch then mounts cleanly out of the way.