Tesla Model 3 sunglasses roof mount - image

Files (2)

BH5.stl

STL

129.3 KB

TM3_shades.stl

STL

29.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BH5.stl	Printable file	129.3 KB STL	Slice file	Slice file	Slice file	Ensure a clean and dry print bed for optimal adhesion.
TM3_shades.stl	Printable file	29.2 KB STL	Slice file	Slice file	Slice file	Ensure a clean and dry print bed for optimal adhesion.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Tesla Model 3 sunglasses roof mount

0 downloads26 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Made to fit in between the gap of the roof glass and the fabric. I could not find something similar, so I made my own. BH5 is a revision of BH4. Slightly smaller, imnproved and rounder.