Tesla Model S Center Bin (Modified) - image

Files (1)

Model_S_Tesla_Tray.stl

STL

2.6 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Model_S_Tesla_Tray.stl	Primary model	2.6 MB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Tesla Model S Center Bin (Modified)

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Remixed the tray designed by RichardP85D by removing the large center bracket and beefing up the front. The original file was slightly too small for the Model S I used, so I sized it up a few mm, now it is 210.84mm wide and fits snugly in place. I attached my Tesla Button logo (https://www.thingiverse.com/thing:2630338) with PVC cement as a pull knob instead of using the finger holes.