Files (8)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| model_s_console_arm_back_left.stl | Choose left variant | 7.4 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| model_s_console_arm_back_right.stl | Choose right variant | 7.3 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| model_s_console_arm_front_left.stl | Choose left variant | 7.1 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| model_s_console_arm_front_right.stl | Choose right variant | 7.2 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| model_s_console_back_crossbar.stl | Accessory piece | 7.7 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| model_s_console_center_divider.stl | Accessory piece | 4.5 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| model_s_console_drinkholder_v2.stl | Mount / bracket | 488.6 KB STL | Slice file | Slice file | Slice file | Ensure proper bed adhesion to prevent warping |
| model_s_console_front_crossbar.stl | Accessory piece | 8.1 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model S Center Console
Shared by
3DPrintedCarPartDescription
This is a self-printable Tesla Model S Center Console. I designed it with TinkerCad and have printed it on a MakerBot Replicator 2. All you need besides filament and patience is an xacto knife and some superglue. The drinkholders were tested with Diet Coke, various water bottles, a Tesla coffee mug, and an Amstel (!) Bigger drinks may not work. The phone holder was tested with an iPhone 5 and iPhone 4S. Bigger phones may not work. If you have problems with this please let me know - would love to improve it! - and you are successful with this please send me a picture! [Update 10/13/14... redesigned slightly to make it easier to print. I fused the top and bottom together and have positioned it at an angle so it can be printed as a single unit. This also greatly reduces warping, and it this angle the Tesla logo prints much better. Anyway I've uploaded the new files, if you had previously downloaded, you might want to check these out.] [Update 5/2/16... redesigned slightly; tops of supports have been strengthened].
Compatible Cars
Originally published on thingiverse.com by Ole Eichhorn (OleEichhorn) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
