Tesla Model S console insert (2012-2016) - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 18%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Tesla Model S console insert (2012-2016)

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is my first creation here (with not much experience in 3D design) However I suceed in doing this console insert #2 to get more cup holder and storage in the tesla model S. You first need that print: https://www.thingiverse.com/thing:3224508. And then if you want more storage, you add mine. Printing: Basic PETG setup, no support needed. Part is about 235mm long so you'll need a medium/large 3d printer. Standard quality and 15% infil came to about 425gr in weight.