Tesla Model S License plate bolt socket - image

Files (1)

TeslaLicenseBoltSocket.stl

STL

59.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
TeslaLicenseBoltSocket.stl	Primary model	59.1 KB STL	Slice file	Slice file	Slice file	Ensure a strong bond to the build plate to prevent shifting during printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Tesla Model S License plate bolt socket

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a tool to remove the front license plate bolts from your Tesla. The bolts are not tight and the tool has enough strength to remove them. But be careful, it will strip out if too much pressure is applied. It has a 1/4 wrench socket on the back side. I also included ribs to help with hand use. It's not a perfect design but it works. https://youtu.be/E5IYu2jFw2o