Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| tesla_wall_connector-v2b.stl | Printable file | 302.7 KB STL | 18g $0.42 | 19g $0.46 | 42g $1.01 | Ensure a brim or raft is used for stability if necessary |
| tesla_wall_connector-v2b2.stl | Printable file | 216.8 KB STL | 16g $0.38 | 17g $0.41 | 37g $0.90 | Ensure a brim or raft is used for stability if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model S Wall Charger Plug Holder
Shared by
3DPrintedCarPartDescription
Hide the screws and enclose the top. One screw in a stud is good enough for ABS, second hole can be used for flexibles. V2: Interpolate charge end hole, round corners, enclose back, angle secondary hidden screw hole, reduce tessellation of screw holes, reduce amount of filament/print time.
Compatible Cars
Originally published on thingiverse.com by Debabrata Banerjee (dbavatar) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
