Tesla Model X No Drill Front License Plate Mount - image

Files (8)

Center_Bar_ModelX.stl

STL

56.1 KB

Center_Grill-Insert_ModelX.stl

STL

186.0 KB

Left_Bracket_FDM.stl

STL

123.9 KB

Left_Bracket_ModelX.stl

STL

270.4 KB

License_Holder_FDM.stl

STL

110.8 KB

License_Holder_ModelX.stl

STL

360.8 KB

Right_Bracket_FDM.stl

STL

123.9 KB

Right_Bracket_ModelX.stl

STL

270.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

8 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Center_Bar_ModelX.stl	Printable file	56.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
Center_Grill-Insert_ModelX.stl	Printable file	186.0 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
Left_Bracket_FDM.stl	Choose left variant	123.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Left_Bracket_ModelX.stl	Choose left variant	270.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
License_Holder_FDM.stl	Mount / bracket	110.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
License_Holder_ModelX.stl	Mount / bracket	360.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
Right_Bracket_FDM.stl	Choose right variant	123.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Right_Bracket_ModelX.stl	Choose right variant	270.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Grilles

Tesla Model X No Drill Front License Plate Mount

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

3D Printable mounting bracket for the Tesla Model X Front License Plate. It is designed to be inserted into the lower grill in the front (in the middle section of the lower grill). The reason it is designed in such a way is because the intended use is to get out of "Fix It" tickets. When you get a "Fix it" ticket for no front license plate. You set this up and slip it on the lower front grill. You show it to the cops and you pop it off once the cop signs your ticket. If you want to secure this to the front grill, there are holes in the bracket where you can add zip-ties to hold it together. Revision History: 10May2018 - Added 3 Files with *_FDM suffix that are meant to be easier for FDM printers to print.