Tesla_Model_X_Tray.stl

STL

185.5 KB

Tesla_Model_X_Tray_Pull_Handle.stl

STL

74.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_Model_X_Tray.stl	Printable file	185.5 KB STL	Slice file	Slice file	Slice file	Ensure proper fit within the center console cubby by checking the dimensions
Tesla_Model_X_Tray_Pull_Handle.stl	Printable file	74.7 KB STL	Slice file	Slice file	Slice file	Ensure proper fit within the center console cubby by checking the dimensions

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tesla Model X Tray

0 downloads32 views0 likes

Shared by

Verified

Description

Tesla Model X Tray fits within the center console cubby. The original design was a rectangle, and it didn't fit properly. A slight taper was added. Use a tiny screw (or glue) to attach the pull handle to the tray. I printed this in ColorFabb nGen Black and Silver on a Makerbot 2X. Designed in OnShape. Original Cad Model: https://cad.onshape.com/documents/d53eb0b85d968c9eadcd7635/w/a7a6ecb498006aa7de664231/e/14d5dd7b90f2ef96f2eddbd1