Tesla Safety Screw Socket Adapter - image

Files (2)

10mm_Adapter.stl

STL

115.3 KB

12mm_Adapter.stl

STL

123.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
10mm_Adapter.stl	Printable file	115.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality
12mm_Adapter.stl	Printable file	123.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tesla Safety Screw Socket Adapter

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A socket adapter for the front license plate bracket screws on the refreshed Model S. I was surprised that no socket I owned would fit the screws holding on the bracket, so I printed up an adapter for a standard socket and the screws were removed with ease. I assume Tesla will start using these screws for other applications as well. I have included an adapter for a 10mm hex socket as well as 12mm. They can also be used with a nut driver. I recommend using PET-G for printing instead of PLA since it is tougher and less brittle, however PLA may work just fine.