Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Tesla UMC Plug and Cable Holder

0 downloads38 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

A holder for Tesla UMC cable and plug. The cable rests on one side while the the Type 2 plug rests on the other side. The plug is secured in place by using gravity and a small protrusion on the upper side. The plug leans backwards about 15 degrees to avoid pooling of rain water. It's designed to fit standard Finnish heating poles of 60mm diameter. Assembly requires 4x M4 screws and 4x M4 nuts. Washers are optional.