Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tools for Replacing rear differential bushings (mounts) for BMW vehicles
Shared by
3DPrintedCarPartDescription
Here you can see a tutorial from another guy for Replacing the rear differential bushings. http://forum.e46fanatics.com/showthread.php?t=521636 I didnt want to buy these expensive pulling tools so i printed them. It worked surprisingly well for the front bushing but the outer shell of the rear bushing wouldnt go out so i had to use my saw. Pressing in the new bushings also worked very good. In addition to the printed Parts i used a few long M10/M12 Bolts, Nuts, a lot of big washers, a piece of metal pipe and some steel Plates.
Compatible Cars
Originally published on thingiverse.com by (zockerbender) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
