Toyota 4 Cylinder Engine 22RE, Complete working model - image

Files (23)

Timing_Idle_gear_3.stl

STL

285.0 KB

Oil_cap.stl

STL

428.5 KB

Thermostat_housing.stl

STL

1.3 MB

Spring_retainer.stl

STL

53.5 KB

Starter_Motor_Cover.stl

STL

47.4 KB

Cylinder_Head.stl

STL

10.3 MB

Throttle_body.stl

STL

1.3 MB

Crank_spacer.stl

STL

23.1 KB

Camshaft2.stl

STL

139.8 KB

Spark_plug_wire_barrel_jack_cover.stl

STL

50.7 KB

Rear_Main.stl

STL

2.3 MB

Left_motor_mount.stl

STL

178.5 KB

Oil_pan.stl

STL

865.0 KB

Starter_Motor_Mount.stl

STL

62.7 KB

VALVE_COVER.stl

STL

1.5 MB

Starter_Drive_Gear.stl

STL

83.3 KB

Intake_valve.stl

STL

220.5 KB

Camshaft1.stl

STL

139.8 KB

Right_motor_mount.stl

STL

189.0 KB

Timing_Idle_gear_1.stl

STL

315.7 KB

Cam_bearing_cap.stl

STL

205.1 KB

Intake_manifold_upper_-_part_2.stl

STL

1.4 MB

Spark_plug_boot.stl

STL

241.4 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

23 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Timing_Idle_gear_3.stl	Printable file	285.0 KB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints
Oil_cap.stl	Cover / cap	428.5 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Thermostat_housing.stl	Printable file	1.3 MB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints
Spring_retainer.stl	Printable file	53.5 KB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints
Starter_Motor_Cover.stl	Cover / cap	47.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Cylinder_Head.stl	Printable file	10.3 MB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints
Throttle_body.stl	Printable file	1.3 MB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints
Crank_spacer.stl	Accessory piece	23.1 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Camshaft2.stl	Printable file	139.8 KB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints
Spark_plug_wire_barrel_jack_cover.stl	Cover / cap	50.7 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Rear_Main.stl	Printable file	2.3 MB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints
Left_motor_mount.stl	Choose left variant	178.5 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Oil_pan.stl	Printable file	865.0 KB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints
Starter_Motor_Mount.stl	Mount / bracket	62.7 KB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints
VALVE_COVER.stl	Cover / cap	1.5 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Starter_Drive_Gear.stl	Printable file	83.3 KB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints
Intake_valve.stl	Printable file	220.5 KB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints
Camshaft1.stl	Printable file	139.8 KB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints
Right_motor_mount.stl	Choose right variant	189.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Timing_Idle_gear_1.stl	Printable file	315.7 KB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints
Cam_bearing_cap.stl	Cover / cap	205.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Intake_manifold_upper_-_part_2.stl	Printable file	1.4 MB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints
Spark_plug_boot.stl	Printable file	241.4 KB STL	Slice file	Slice file	Slice file	Ensure a well-calibrated and reliable printer due to the complex and large nature of the prints

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Toyota 4 Cylinder Engine 22RE, Complete working model

0 downloads187 views0 likes

Shared by

Michael Chen

Verified

Description

Complete hardware kits that include all the non-printed parts can be found over at MakerRx Completely reverse engineered Toyota 22RE 4 cylinder engine. Can completely print a fully rotating model. Working crank, pistons, and valve train. The valves open and close!!!. It may not be the most exciting engine but its the only one I had in my garage. Great if you want to learn about engines and how the moving parts in them work. All parts are printed except for a few bearings and fasteners. More than 3 days of total print time. The block alone was 34 hours. So make sure you have a well calibrated and reliable printer. Some print times calculated in Cura at .2mm layer height.