Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 210302_Toyota_oil_funnel_R02.stl | Primary model | 281.8 KB STL | Slice file | Slice file | Slice file | Ensure a secure fit by verifying the thread pitch and outer diameter match your engine's oil filler cap |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota Engine Oil Funnel
Shared by
3DPrintedCarPartDescription
Due to the baffle plate under the rocker cover, a regular funnel does not sit well in a Toyota 1FZ-FE engine as found in Land Cruiser 80 and 100 models. This funnel screws intro the thread of the rocker cover to leave 2 hands free for pouring. Note you may be able to purchase one of these in a nearby store, I decided to design and print one instead. I am sure this will fit in other Toyota engines. The thread pitch is 3mm, with outer diameter 37mm and base diameter of 33mm. If your oil filler cap matches it should fit your engine. I will add notes of what fits as I get feedback.
Compatible Cars
Originally published on thingiverse.com by michael atkin (axehead) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
