Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 35% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Left_Side.stl | Choose left variant | 148.4 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 35% infill. Pick the matching side before printing. |
| Right_Side.stl | Choose right variant | 155.7 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 35% infill. Pick the matching side before printing. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota Highlander liftgate speaker adapter for 3 1/2" speaker
Shared by
3DPrintedCarPartDescription
This is an adapter that I had to make to get a 3 1/2 inch speaker into the Toyota Highlander 2018 liftgate because the current mount is for a 3 inch and a larger speaker will not fit. My final design needed a notch cut into it so that one of the clips for the tail light cover could go through it. I printed mine in PLA with 100% infill. It might have been overkill, but my early tests with 25% were not strong at all.
Compatible Cars
Originally published on thingiverse.com by Bradford Crist (BadBrad97) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
