Files (1)

T_L_funnel_adapter_v2.stl

STL

136.4 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

15g

Based on 25% main infill across listed model files

Material cost

$0.35

Filament only at roughly $24/kg PETG / ASA

Print time

25m–42m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
T_L_funnel_adapter_v2.stl	Primary model	136.4 KB STL	13g $0.32	15g $0.35	32g $0.77	Ensure a strong adhesion to the build plate to prevent warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Toyota/Lexus oil filler adapter

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Oil fill adapter for your funnel when adding oil to your Toyota/Lexus engine. This is for engines that do NOT have the threaded oil cap, but rather the metal tabbed oil cap. (See photo). It has always been annoying when ever changing oil on my Toyota or Lexus cars, that I have to hold the funnel in place when refilling the engine with oil. This adapter lets me place the funnel in place, without constantly holding it. I can then pour oil into the funnel without worry of the funnel falling out, and spilling oil on the engine, or other areas of the engine compartment. Remember the old car guy saying: "Oil is cheap, but engines are expensive!".