Toyota Part No.: 85316-06021 WINDSHIELD WASHER JAR CAP - image

Files (1)

Tacoma_WasherFluid_Cap_graphics.stl

STL

1.8 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tacoma_WasherFluid_Cap_graphics.stl	Cover / cap	1.8 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Toyota Part No.: 85316-06021 WINDSHIELD WASHER JAR CAP

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The washer fluid cap on my 98 tacoma felt apart so i designed and printed this replacement. This should be toyota part number 85316-06021 and should fit the following models. Avalon 1995-2012 Limited, XL, XLS Camry 1994-2006 CE, DX, LE, SE, XLE Tacoma 1995-2004 DLX, SR5 But I can only be sure that it fit my truck, As you can see on the pictures I printed a version without graphics on the top to test fit. It has been holding up nicely for months now.