Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| bracket_fixed_fixed.stl | Mount / bracket | 136.0 KB STL | 13g $0.32 | 15g $0.35 | 32g $0.77 | Ensure a snug fit around the speaker for optimal performance |
| bracketpassenger_fixed.stl | Mount / bracket | 126.4 KB STL | 13g $0.32 | 14g $0.34 | 31g $0.75 | Ensure a snug fit around the speaker for optimal performance |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota Pickup 89-95 Lower Dash Speaker Mount Bracket Adapter Plates for 4" inch speakers
Description
Summary Toyota Pickup 89-95 Lower Dash Speaker Mount Bracket Adapter Plates for 4" inch speakers. These adapter plates allow you to mount replacement 4" speakers in place of the factory ones. In my case, i mounted Pioneer TS-D1002R 2-Way 4" Car Speakers in my 1991 Toyota Pickup 2WD Standard Cab /w 22RE engine. One is for the driver side, the other for the passenger. The passenger side mount is as close to a 45' angle as possible. The drivers side mount is vertical. You screw the mount to the speaker, then the mount to the factory screw holes. Instructions Used sketchup + calipers to measure the 120mm distance between the two toytota factory screw holes that mount the factory speakers. Then measured the new pioneer speakers i got to create a snug gasket around each speaker. I then Printed the brackets in ABS, and Acetone smoothed them.
Compatible Cars
Originally published on thingiverse.com by (Vis0r) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
