Files (1)

2018_Tacoma_Change_holder.stl

STL

54.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
2018_Tacoma_Change_holder.stl	Mount / bracket	54.0 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to prevent warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Toyota Tacoma Change holder

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I made this to solve my change problem. The 2018 Tacoma doesn't have a spot for change that keeps it organized. This holds plenty of coin while fitting snug in the spot in front of the middle cup holder. When printed it does has some minor ghosting on the outside from the coin holders but that is a minor thing compared to the added capacity. There is also a spot to roll bills and keep them together too.