Files (1)

Toyota_Vent_Grommet.stl

STL

51.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Toyota_Vent_Grommet.stl	Primary model	51.4 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

Toyota Vent Grommet

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Most of my vent grommets that keep the hvac vents from flopping back and forth broke, so I modeled this up. It's pretty much exactly the original part that came from Toyota (Toyota only sells the whole vent assembly however). Depending on how your printer prints, you might have to sand the part a little smaller. I know this fits on a 2nd gen T100, but I believe it fits many other older Toyotas as well.