Files (1)

TPS_adapter_public.STL

STL

254.2 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

18g

Based on 25% main infill across listed model files

Material cost

$0.43

Filament only at roughly $24/kg PETG / ASA

Print time

31m–51m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
TPS_adapter_public.STL	Primary model	254.2 KB STL	17g $0.40	18g $0.43	39g $0.95	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

TPS adapter BMW

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

BMW adapter to fit M50 TPS (Ø10mm axel) on a M20 Throttle. Catalog note: TPS adapter BMW is a 3D-printable car-part listing indexed for classified fitment BMW. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.