Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Universal CCS cover/protector - perfect for Tesla Model 3
Shared by
3DPrintedCarPartDescription
This CCS cover fits perfect on CCS port of model 3. The bottom high is only 1mm. I designed it as an universal cover (addentional without TESLA logo). Maximum high is 21mm so no collision with locking holes if the car used it. For Model 3 not relevant. I check the size with two Typ2 connectors. Both overlap the cover a little bit. No one can stole it. Add variations with magnets inside. Pause printing at layer 15 (if use 0,2 resolution) add two magnets and resume printing. Magnet size: ~9,8mm x ~9,8mm x ~1,8mm.
Compatible Cars
Originally published on thingiverse.com by Math (3DMath) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
