Aukey_Bezel.stl

STL

636.4 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

25g

Based on 25% main infill across listed model files

Material cost

$0.61

Filament only at roughly $24/kg PETG / ASA

Print time

43m–1.2h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Aukey_Bezel.stl	Primary model	636.4 KB STL	23g $0.56	25g $0.61	55g $1.33	Ensure a clean and dry build surface for optimal adhesion.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

USB charger bezel for Rugged Ridge 13551.16 Dash Multi-Mount Phone Kit

0 downloads35 views0 likes

Shared by

Verified

Description

This thing is a simple bezel to mount an Aukey dual USB car charger into a Rugged Ridge Dash multi-mount unit to power a phone or gopro or whatever. Article about the whole project can be found here: https://buildsbybrad.wixsite.com/home/single-post/2018/06/26/Jeep-dash-USB-power-port

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Brad McElroy (bradmc) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.