Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| switchcover_v2.5.stl | Cover / cap | 205.2 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
USB insert for 2006 Subaru WRX
Shared by
3DPrintedCarPartDescription
An insert for female USB leads to go into one of the empty control spaces in a 2006 Subaru Impreza WRX. The gap in the middle should be enough for two female leads to fit snugly. This was created to set up a tidier way of containing the leads from an Atoto A6, rather than just having them hang down under the centre console. It should fit the base Impreza as well, but I don't believe the STI has the required empty control space (you get fun stuff like diff lock controls instead).
Compatible Cars
Originally published on thingiverse.com by Jake Faulkner (jayeffNZ) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
