Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 100%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

WRX STI USB Plate

0 downloads51 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

My son swapped the sound system head in his Subaru WRX STi 2013 car. The remote USB connection in the centre console also needed changing. To secure the new USB socket, I designed and 3D printed a USB panel mount. Here is my design. The printed panel slots into the old console hole and is secure via a push fit. The USB socket is held in-place by another self-tapping screw from the underside of the 3D printed panel. My print is made in PETG 1.75mm 3DFillies black filament, with 0.2mm layer height and 100% infill on a PRUSA I3 MK3S printer. I hope that you can find this print useful, too. Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.