Volkswagen 2.0T - Valve Blasting Adapter - image

Files (1)

VOLKSWAGEN_2.0T_VALVE_BLASTING_ADAPTER-4.stl

STL

110.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
VOLKSWAGEN_2.0T_VALVE_BLASTING_ADAPTER-4.stl	Primary model	110.3 KB STL	Slice file	Slice file	Slice file	Ensure a secure fit with the 32mm vacuum hose

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Volkswagen 2.0T - Valve Blasting Adapter

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I created this adapter to Walnut Blast the intake ports on my 2.0 TSI engine while using a standard 32mm vacuum hose to extract the debris and shells out of the way. In the photos is an early version of the adapter. The photos of before were taken when the car had just over 100,000KM. With the adapter the process was very easy and clean.