← Back to Browse Parts
Volkswagen/Audi 1.8t coilpack brackets - image
Print guidance estimate
Slicer data required
Print cost & setup estimate
Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.
0 model files
Recommended kit
Slice required

Slice the required model files; source file size is not printable volume.

Material cost
Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time
Slice required

Slice with the recommended material, infill, orientation, and supports.

STL fileRoleSource sizePETG / ASA 20%PETG / ASA 25%100% solidRecommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Volkswagen/Audi 1.8t coilpack brackets

0 downloads41 views0 likes
Download at source
3DPrintedCarPart logo

Shared by

3DPrintedCarPart
Verified

Description

coilpack bracket for a 1.8t Audi/VW, you need 2 x M6 20mm allenhead bolts (bracket to valve cover), 2 x nylon washers to between the bracket and the valve cover. 1 x M4 x 12mm bolt for center, be sure to put a nut or washer between coilpack and M4 bolt.

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by robert morris (robbiefj) · License: CC BY-NC

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.