Volvo P1800 ashtray cellphone holder for SP connect - image

Files (2)

P1800_ashtray_sp_connect_cellphone_holder_base.stl

STL

79.9 KB

P1800_ashtray_sp_connect_cellphone_holder_flap.stl

STL

1.6 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
P1800_ashtray_sp_connect_cellphone_holder_base.stl	Mount / bracket	79.9 KB STL	Slice file	Slice file	Slice file	Print with at least 1.2 or 1.6 mm layer height for functional threads
P1800_ashtray_sp_connect_cellphone_holder_flap.stl	Mount / bracket	1.6 MB STL	Slice file	Slice file	Slice file	Print with at least 1.2 or 1.6 mm layer height for functional threads

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Volvo P1800 ashtray cellphone holder for SP connect

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Heya! This is a two piece insert for a Volvo P1800 ashtray to magnetically hold a cellphone in its SP connect SPC+ cover. You need to assemble the two parts with two M5 screws - I suggest printing at least the flap in 1,2 or 1,6 mm layer height to make the printed threads work. The original ashtray metal spring needs to be removed but the ashtray drawer works well nonetheless - it just does not have its endstop. You have to pull out the ashtray quite far to fold up the flap. Needed material: 2 M5x25 screws 1 SP connect magnetic adhesive mount (that round magnet ring) I suggest printing it in PETG just for temperature stability.