
Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| kamera_vacins.stl | Primary model | 949.0 KB STL | 46g $1.10 | 50g $1.20 | 110g $2.63 | Ensure a strong adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Volvo trunk keyhole rear camera adapter
Shared by
Michael ChenDescription
Replacement for Volvo trunk key cap. It is still possible to access keyhole by taking out this adapter. Now it has two functions - protect keyhole from dust and hold reverse camera. No sticky tapes or any changes required to do to your car trunk to install this solution. If for any reason you want to remove the camera, just remove this adapter and put back the original keyhole dust cap. To be used with this camera https://www.ebay.com/itm/112675518007 Might be that it fits some other models as well.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.

