Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Volvo V50 CD iPhone/iPad holder

0 downloads40 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I created this bracket to slide into the CD slot of my Volvo V50. No screwing required. Reused an iPhone Xs car stand (https://www.thingiverse.com/thing:3318826) and reshaped it a bit to hold my phone including sleeve. The 2 parts are hold together with 2 pins. One can choose to glue the pins so the parts won't come loose during driving. UPDATE 20191118: I added a stand for an iPad mini 5 (iPad mini 5 stand.stl) and made the CD clip a bit smaller so de display is more readable (Volvlo V50 CD HOLDER v3.stl). This clip should be printed with support on the baseplate, otherwise the slope left and right will be ugly (as happened with my print).