Volvo V50 dash mount for samsung S3 - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Volvo V50 dash mount for samsung S3

0 downloads37 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

i drawed it in Sketchup and you can change the dimensions for other phones. if you don't use the cd-player of the radio just take out the radio front and mount the cradle as in the photo's i used M4 with V-coils but you can tap M4 in the holes. im also busy to make one with the support for the Parrot MKI9200 display (that i use to play Mp3) the big bar in the stl with the cradle you don't need. for mounting use the small blocks in the other stl they fit in the cd slie.