Volvo XC60 euro + credit card cup holder - image

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 25% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Volvo XC60 euro + credit card cup holder

0 downloads45 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Fits nicely in the coffeecup holder of the Volvo XC60 (but should work on other cars as well) and holds euro coins (2 EUR, 1 EUR, 50 CENT, 20 CENT and 10 CENT) as well as room for parking (credit) cards and a pen in the middle. Don't forget to print the main "money" body as well as the "inserts" these go underneath the money so its easy to slide it out.

Compatible Cars

Volvo XC60

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Geert Michiels (hixfield) · License: CC BY-NC

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.