VW ( Corrado ) VR6 cable holder ( 021 971 824B ) - image

Files (8)

1.stl

STL

8.3 KB

2.stl

STL

24.5 KB

3_rn_4.stl

STL

31.6 KB

5.stl

STL

24.6 KB

6.stl

STL

29.0 KB

complete_rail.stl

STL

184.9 KB

part1.stl

STL

97.5 KB

part2.stl

STL

97.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

8 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
1.stl	Accessory piece	8.3 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
2.stl	Accessory piece	24.5 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
3_rn_4.stl	Printable file	31.6 KB STL	Slice file	Slice file	Slice file	Print in medium or high quality for better results
5.stl	Accessory piece	24.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
6.stl	Printable file	29.0 KB STL	Slice file	Slice file	Slice file	Print in medium or high quality for better results
complete_rail.stl	Printable file	184.9 KB STL	Slice file	Slice file	Slice file	Print in medium or high quality for better results
part1.stl	Printable file	97.5 KB STL	Slice file	Slice file	Slice file	Print in medium or high quality for better results
part2.stl	Printable file	97.3 KB STL	Slice file	Slice file	Slice file	Print in medium or high quality for better results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

VW ( Corrado ) VR6 cable holder ( 021 971 824B )

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Cable holder. Because size availeble in 1 piece and in 2 pieces, it might not fit the printbed in 1 piece. I printed in PLA fast mode, as can be seen on the pictures quality of the printed part is not high. It should be printed in medium or high quality with PETG or other heat resistant filament.