Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

VW Hub Caps - VW Nabendeckel

0 downloads53 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I designed this hub cap for a VW Golf. I printed it in black and then painted the logo in white with tire markers, but I would consider painting optional. I would recommend to print it with the clips downfacing, because the part that will be outside later will come out nicer than when the logo is on the bottom. For this, more support will be needed! Enjoy!