VW T3 Teca Camper - Furniture handle (complete assembly) - image

Files (5)

Counterpart_V01.STL

STL

448.5 KB

Front_V01.STL

STL

394.2 KB

Grip_V01.STL

STL

755.3 KB

Pin_V01.STL

STL

9.7 KB

Snapper_V01.STL

STL

53.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Counterpart_V01.STL	Printable file	448.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
Front_V01.STL	Printable file	394.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
Grip_V01.STL	Printable file	755.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
Pin_V01.STL	Accessory piece	9.7 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Snapper_V01.STL	Printable file	53.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

VW T3 Teca Camper - Furniture handle (complete assembly)

0 downloads54 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My original parts broke so I decided to copy it. Please note that you will have to use your old spring. In order to attach the "grip" to the "front" you will also need some pins (I used 2,5 mm diameter metal pins). Depending on your printer you should drill the holes again after printing. I suggest using ABS material for this print, so that you can use some acetone to improve surface finish. Let me know if this worked for you;-) =========================.