VW New Beetle Glove Box Replacement Handle - image

Files (2)

vw-beetle-glovebox-handle-top.stl

STL

948.5 KB

vw-beetle-glovebox-handle.stl

STL

771.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
vw-beetle-glovebox-handle-top.stl	Printable file	948.5 KB STL	Slice file	Slice file	Slice file	Use a brim or raft for better adhesion if necessary
vw-beetle-glovebox-handle.stl	Printable file	771.8 KB STL	Slice file	Slice file	Slice file	Use a brim or raft for better adhesion if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

VW New Beetle Glove Box Replacement Handle

0 downloads54 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

VW New Beetle (2005) glove box door handle. Might fit other models 1998-2008 Volkswagen New Beetle. Made in two parts so you can customize the top part of the handle with another color or material. I used PLA as that is what i had on hand, but i'm sure ABS would last longer. If you are missing the hinge rods, you can use M3 bolt with the head cut off, alternative is to use 10 or 8 gauge copper wire cut to length and epoxy it in place.