VW Sharan / Seat Alhambra Seat Back Handle - image

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 25% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

VW Sharan / Seat Alhambra Seat Back Handle

0 downloads75 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Alhambra Handle, For adjusting Seat back position on a Seat Alhambra UPDATED FILES - CORRECT THIS TIME ---------------------------------------------------------- This works on a Seat Alhambra, Ford Galaxy or VW Sharan. Tried and tested. This is a replacement for - but not a direct copy of - VW Audi part number 7MO 881 671 B. The other part number on the original part was XM21 625 28 AAW - this may be a Ford Part Number. I've included the native files, and the test print I did to make sure the spiggots all fitted nicely. I'd highly recommend printing the open ended test one first to see how it fits with your car's back. I still use the test one on the Driver's side. Print, Enjoy, Like, Collect, "I've made one" etc. @ALSO CHECK OUT MY TOYOTA PARCEL SHELF CLIPS HERE:@ http://www.thingiverse.com/thing:426125 No Rights reserved on this. Make as many as you like, sell some on at a profit. etc. p.s. if you like this car part, why not download (or just view) the other designs I've done: 20/06/2016: VW Sharan / Alhmabra Rear Adjustment Handle http://www.thingiverse.com/thing:1586975 15/01/2016: VW Sharan Trim Clip (3D Printed) http://www.thingiverse.com/thing:1274409 14/01/2016: VW Sharan Trim Clip (as Mass-produced) http://www.thingiverse.com/thing:1261167 25/10/2015: Alhambra Seat Handle http://www.thingiverse.com/thing:1092459 11/01/2015: Toyota Engine Seal Fix http://www.thingiverse.com/thing:629300 12/08/2014: Toyota Avensis Parcel Shelf Clip http://www.thingiverse.com/thing:426125 06/02/2015: Car Panel Clip (2 Versions, 4 parts!) http://www.thingiverse.com/thing:665635