VW interior door handle, MK4 (Bora, Jetta, Golf, GTI, etc., '99-'05) Part no. 3-B0-867-175-A - image

Files (1)

Driver_Door_Handle_Trim.STL

STL

2.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Driver_Door_Handle_Trim.STL	Primary model	2.1 MB STL	Slice file	Slice file	Slice file	Print in the tall dimension as shown in the pictures for optimal results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

VW interior door handle, MK4 (Bora, Jetta, Golf, GTI, etc., '99-'05) Part no. 3-B0-867-175-A

0 downloads52 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement part for the interior driver door handle on many VW vehicles from the early 2000's (see title). It is not an exact one-to-one match; some of the unnecessary latching features were removed for simplicity sake. It mounts correctly and holds on well nonetheless. Recommend printing it in the tall dimension as shown in the pictures; recommend printing out of nylon or other high-temp material.