Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 25% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg ASA / PETG

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	ASA / PETG 20%	ASA / PETG 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

VW T4 Android radio frame

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is an adapter frame for an Android radio retrofitted into a Volkswagen VW T4. In US they call the car Vanagon. Most likely you have to break out the lower half of the DIN slot to get a double DIN slot, i.e. 7" by 4". Printed in black ASA because of temperature stability, 0.2mm layer height, 0,4mm nozzle and 0,5mm extrusion for better layer adhesion. Housing during print is required, 90° Bed, 250° extruder temperature, Scotch tape against warping It is a FreeCAD project, Version 0.19, I have included the FreeCAD file. Update: The ASA shrinking was so big that I had to add a few mm to keep the slot big enough. New Version: 1.2.