Files (2)

VW_T4_Dashboard_Blank.stl

STL

215.9 KB

VW_T4_Dashboard_Blank_Hook.stl

STL

60.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
VW_T4_Dashboard_Blank.stl	Printable file	215.9 KB STL	Slice file	Slice file	Slice file	Print the blank and hook separately as per the designer's recommendation
VW_T4_Dashboard_Blank_Hook.stl	Printable file	60.7 KB STL	Slice file	Slice file	Slice file	Print the blank and hook separately as per the designer's recommendation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

VW T4 Dashboard Blank

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Just Print and insert the hook to the blank.(i tried to print as one piece, but then the hook breaks as you apply force to it because of the bending force is equal to the layer direction).