Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | ASA / PETG 20% | ASA / PETG 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
VW T5 Dashboard iPhone 12 Pro holder with MagSafe charger
Shared by
3DPrintedCarPartDescription
Volkswagen Transporter T5 (2007) Dashboard iPhone 12 Pro holder with MagSafe charger With the space for a charging cable and with a slot for a parking ticket The base is attached to the dashboard with double-sided tape. I have a non-slip mat glued on the base, but of course that is not necessary. Because ABS and ASA are difficult to print because the fan is off, the spacers are printed separately. If you want to use them, glue these with superglue.It is not necessary because there is a tight magnet in the MagSafe charger. ASA and ABS are difficult to print even with a printer in a closure. The solution to this is increase the skirt to 60 layers or more. There will be no cold or draft and your print will remain attached to the bed. Use 2x M5 x 10mm Cooling Fan mount screws.
Compatible Cars
Originally published on thingiverse.com by Pascal (Satellietje) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
