Wheel Center Cap/ Radnabenabdeckung BMW (Black/White) - image

Files (1)

BMW_Radnabenabdeckung_Schwarz-Weiß.stl

STL

399.4 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

21g

Based on 25% main infill across listed model files

Material cost

$0.51

Filament only at roughly $24/kg PETG / ASA

Print time

36m–1.0h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BMW_Radnabenabdeckung_Schwarz-Weiß.stl	Primary model	399.4 KB STL	19g $0.47	21g $0.51	46g $1.11	Ensure proper fitment by checking the dimensions and creator's notes

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Wheel Center Cap/ Radnabenabdeckung BMW (Black/White)

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Size: 68,9 x 68,9 x 17,4 mm Holediameter: 68mm Colors: Black/White. Catalog note: Wheel Center Cap/ Radnabenabdeckung BMW (Black/White) is a 3D-printable car-part listing indexed for classified fitment BMW. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.