Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Window Retention clip

0 downloads45 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I have no idea if this will help anyone else but I feel its worth posting so the next guy won't have to measure and design in the rain. This is a clip to hold the window up in a 2003 Buick regal I was driving along and it just dropped I think the regulator died. So I made this until I can get parts in so I wont have to drive around with tape on the window. Its a massive pain in the butt to install you have to twist it a little to get it to catch the window as I made it to Hold it all the way up. I included a smaller clip you could print a few and put them on to make things easier. but the bigger design has a hole to put a 10 MM bolt in to stop it from slipping inside the door frame as I'm not sure how well PETG will hold up in the heat. Hopefully this will help at least one other person, and also maybe would fit some other cars.