Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Windshield_Reservoir_Cap_E39_v4.stl | Cover / cap | 436.6 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Windshield Reservoir cap for BMW vehicles
Shared by
3DPrintedCarPartDescription
Modeled after the original cap to print a replacement for a BMW E39 from 1999. Printed in PLA as a test, and after 2 months installed, no warping/deformation has occurred. Should also fit E46 models with the M52 engine.
Compatible Cars
Originally published on thingiverse.com by Federico Esquivel (esquivel) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
BMW S54B32 Inline 6 Cylinder Engine
BMW E46
License: CC BY
View & download STL files
M54 front mounted CPS spacer
License: CC BY
View & download STL files
BWM E46 Windshield Washer Filter / Strainer Holder
License: CC BY-NC
View STL source
bmw (E46) M54 engine vacuum f type connector (reinforced)
License: CC BY
View & download STL files
BMW 51478217058
License: CC BY
View & download STL files
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
