Wiper Arm Pivot Dust Seal - Nissan S body - image

Files (1)

WiperArmPivotSeal.stl

STL

339.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

25g

Based on 40% main infill across listed model files

Material cost

$0.59

Filament only at roughly $24/kg TPU

Print time

42m–1.2h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	TPU 20%	TPU 40%	100% solid	Recommendation
WiperArmPivotSeal.stl	Primary model	339.0 KB STL	18g $0.44	25g $0.59	44g $1.05	Ensure proper orientation to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Wiper Arm Pivot Dust Seal - Nissan S body

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

After printing off a redesigned wiper arm pivot bracket for my Nissan S13 200sx (https://www.thingiverse.com/thing:2961561) i found the standard dust cover didn't fit, due to the larger diameter for the bearings. I designed this to be printed in TPU allowing it to slide over and offer the same "sealing" effect as the standard one. This should also work for the S14 and S15 Nissans as i believe they all use the same wiper arm pivot.

Compatible Cars

Nissan (all models)

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Jack Mason (B-Quan) · License: CC BY-SA

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.