Files (1)

ClipWipperToyotaYarris2008.stl

STL

81.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
ClipWipperToyotaYarris2008.stl	Clip	81.1 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Wiper Clip Toyota Yaris 2008

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Mine broke and thought it would be a waste of a good wiper to change the whole thing because of a little bit of plastic so I modeled it and printed a new one. It is my first model so there is probably room for improvement: do not hesitate to tell me if you have comments or suggestions.