Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| visor_L.stl | Printable file | 145.6 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for stability if necessary |
| visor_R.stl | Printable file | 145.2 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for stability if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
wrangler visor holder
Shared by
3DPrintedCarPartDescription
sunvisor in my jeep wont stay up anymore so I designed this holder. I made a left and right side, they slide over the visor and it has a notch to hook in the plastic trim around the roll bar. Tapered to slip into place when you raise the visor. To lower the visor, lift slightly and tilt out of the way. I have been using this for a couple of weeks and they work well.
Compatible Cars
Originally published on thingiverse.com by Devon Dalton (sport67408) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
