YJ Pullbar Covers (Jabsco Remote Control Mounts) - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

YJ Pullbar Covers (Jabsco Remote Control Mounts)

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Covers for the pull bar on the dash of the 92-95 Jeep Wrangler dash as seen in the motion picture Jurassic Park. These screw into the dash and can mount switches and joysticks to control the Jabsco lightbar mounted boat lights (or their much cheaper clones) via the passenger seat. Open to constructive criticism. Punchouts on the back if you choose to mount switches and joysticks. NOT for commercial use, or to be combined with ANY commercial product. Not for sale. If you've paid for these or paid for a combo of these, you've gotten ripped off. Update for version 6: =============== Version 6 Brings these to 100% accurate based on Dimensions by Phil Daley located here: https://www.jpmotorpool.com/reference/jeep/jabsco_switch_plate.pdf Creature features added to the inside so that the switch and joystick cutouts can pop out easily, and this serves to allow the plate to be used both as a blank and a functional unit (just like an electrical breakout panel) depending on the need.